21
Brush Load / Unload
Unloading Brush
If done correctly the brush should
release from the scrub deck and fall to
the floor.
To unload the brush, first lift the scrub
deck by pressing down on the deck lift
pedal . Make sure the pedal is in the
“home” position shown below.
Momentarily (1 to 2 seconds) turn the
key to the “Brush Unload” position.
Note: The brush will release only when
the key returns to the off position (O).
988720UM - ES 1720 User Manual - REV STAR 0707.pmd 7/19/2007, 4:20 PM21
Comments to this Manuals