Minuteman E20 User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
27
The E17/E20
This machine was designed with total operator comfort and ease of use in mind. All machine components have been designed as a total
system to efficiently clean dirty floors. The E17/E20 has two available scrub head types and sizes to fit specific applications. Please
contact your Minuteman representative for specific recommendations for the correct scrub head type, size, and brush type and chemical
applications.
Before using the machine, always perform the following steps to ensure proper machine operation:
Check under the machine for leaks.
Check the rear squeegee for wear and damage.
Check the solution and recovery tank levels.
After using the machine, always perform the following steps:
Check the battery charge level. Charge batteries if necessary. When charging batteries, extra precaution is required:
- Battery acid can cause burns.
- When working on or around batteries, always wear protective clothing and safety glasses.
- Remove metal jewelry. Do not lay tools or metal objects on top of the batteries.
- Charging batteries generate explosive gasses.
DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE.
- Charge the batteries in a well-ventilated area.
- Fluid levels should be checked before and after charging and maintained at the proper levels. If low, add distilled water until
the metal plates are covered.
- If the machine is not used for an extended period of time, batteries should be kept fully charged with a boost charge once a
week.
Check for wire, string, or twine wrapped around the scrub brushes.
Check the rear squeegee for wear and damage.
Check the rear squeegee suction hose for obstructions.
Drain and clean the recovery tank and drain hose cap.
Check under the machine for leaks.
Check the service records to determine maintenance requirements.
WARNING!
- Be sure you understand the machine controls and their functions.
- While on ramps or inclines, avoid sudden stops when tanks are filled.
- Avoid abrupt sharp turns. Slow down driving speed when going downhill.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comments to this Manuals

No comments